660 mm Wooden Arrow for Oliver Bow and Junior Archery

The 660 mm Wooden Arrow for Oliver Bow is intended primarily for junior archers, older children, beginners and compatible lightweight bows.

It combines a wooden shaft, natural turkey feathers, metal point and two different rear-end configurations.

Designed for the Oliver 660 bow

The arrow is primarily intended for the Oliver 660 bow.

It may also work with other compatible lightweight bows when its length and other specifications match the individual archer.

660 mm is approximately 26 inches

The nominal length is 660 mm, which corresponds almost exactly to 26″.

Junior arrow safety

The arrow must remain safely long enough at the archer's maximum actual draw.

Junior archers can increase their draw length as they grow and improve their technique.

An arrow that is suitable today may therefore become too short later.

Selected spruce or pine

The current product data lists selected spruce or pine.

Because wood is a natural material, individual shafts may vary slightly in grain, colour and mass.

8 mm shaft

The shaft diameter is approximately 8 mm.

Diameter alone does not determine correct bow weight or arrow stiffness.

Natural turkey feathers

The arrow uses genuine turkey feather fletching.

Natural feathers can partially adapt when passing close to the bow riser, shelf or hand.

70 mm fletching

The feathers measure approximately 70 mm / 2.75″.

Recessed feather mounting

The current product data states that the feathers are mounted into a groove in the wooden shaft.

Three clear lacquer coats

The shaft is protected by three clear lacquer coats.

This provides ordinary surface protection but does not make the arrow waterproof.

Metal point

The arrow is fitted with a metal point.

Its exact material, weight and attachment method are not specified.

Wooden cut-out version

One option uses a cut-out directly in the wooden shaft and is intended for the Oliver bow with a corresponding traditional string.

Plastic nock version

The second option uses a plastic nock for compatible junior bows with Dacron strings.

Actual fit depends on centre-serving diameter.

Junior and club use

The arrow may also be suitable for youth clubs, school archery and beginner training when correctly matched to the bow and archer.

Seller and selection guidance

The product is not manufactured by Erenhill. The manufacturer is not specified in the available data.

Seller: Vlčí patroni.

Erenhill Archery School can provide expert help with arrow length and nock compatibility.

Frequently Asked Questions

Which bow is it intended for?

Primarily the Oliver 660 bow.

How long is it?

660 mm / approximately 26″.

What is the shaft diameter?

8 mm.

Which wood is used?

Selected spruce or pine.

Which feathers are used?

Natural turkey feathers.

How long are the feathers?

Approximately 70 mm / 2.75″.

Is it suitable for junior archers?

Yes, when the length and other parameters match the individual archer.

Can a junior outgrow it?

Yes.

Which rear-end options are available?

Wooden cut-out or plastic nock.

Who manufactures the arrow?

The manufacturer is not specified.

Who sells it?

Vlčí patroni.

Is Vlčí patroni the brand?

No. It is the seller.

Is Erenhill the brand?

No.

Why is Erenhill Archery School mentioned?

Because it provides expert selection guidance.

Final Summary

The 660 mm Wooden Arrow for Oliver Youth Bow combines a 660 mm wooden shaft, 8 mm diameter, natural turkey feathers, 70 mm fletching, metal point, three clear lacquer coats and two rear-end options.

Manufacturer: not specified. Seller: Vlčí patroni. Expert selection support: Erenhill Archery School.