Erenhill Leather Bow Case – Reversible Calf Leather Bow Case

Erenhill Leather Bow Case is designed for storing and carrying a compatible bow while helping protect it from normal surface contact and abrasion.

The case combines natural calf leather, stitched construction, a reversible layout and two safety fastening points.

Reversible design

One of the key features is the reversible construction.

This allows the case to be adapted to different carrying orientations without requiring separate right-handed and left-handed products.

The most suitable position should be checked with the particular bow and carrying setup before regular use.

Chemically softened calf leather

The case is made from chemically softened calf leather.

As a natural material, leather can show small variations in:

• grain,
• texture,
• shade,
• surface appearance.

Regular use may gradually create a natural patina.

Stitched construction

The leather sections are joined using stitched construction.

The stitching should be checked regularly, particularly around areas subjected to repeated movement or tension.

Damaged stitching or torn leather should be repaired before the case is used again with a bow.

Dual safety fastening

The case is equipped with two safety fastening points.

These help keep the stored bow in position and reduce the risk of accidental movement or slipping during normal handling.

The fastenings should secure the bow without applying excessive pressure to the limbs, riser or finish.

Approx. 38 × 27 cm

The stated dimensions are approximately 38 × 27 cm.

These should be understood as general external dimensions rather than guaranteed internal usable space.

Compatibility depends on the actual:

• bow shape,
• riser dimensions,
• limb construction,
• thickness,
• method of insertion.

Always check the dimensions of the particular bow before ordering.

Approx. 720 g

The case itself weighs approximately 720 g / 25.4 oz.

The final carrying weight will increase according to the weight of the bow stored inside.

Protection during everyday transport

The leather construction can help protect a compatible bow from normal rubbing, dirt and light surface contact during everyday handling.

It is not a rigid protective case and should not be relied upon for situations involving heavy crushing forces, severe impacts or rough transport.

For demanding transport conditions, additional rigid protection may be required.

Leather care

Protect the natural leather from prolonged moisture and excessive heat.

If the case becomes wet:

1. remove the bow,
2. open both fastening points,
3. gently dry the surface,
4. allow the case to air-dry naturally at room temperature.

Do not place it directly on a heater or use intense hot air.

Erenhill Brand

This leather bow case is offered under the Erenhill Brand as part of our archery equipment range.

Summary

Erenhill Leather Bow Case combines a reversible design, chemically softened calf leather, stitched construction and dual safety fastening.

It measures approximately 38 × 27 cm, weighs around 720 g / 25.4 oz, and is designed for compatible bows that fit its dimensions.