Cart
0
0.00 zł
Lazecký ZEUS 68″ – Handcrafted Czech Longbow with Zebrano Hardwood Riser
Lazecký ZEUS 68″ is a handcrafted Czech longbow combining modern laminated limb construction with carefully selected natural hardwoods. Featuring fiberglass and ash veneer limbs, a distinctive zebrano riser and jatoba limb tips, it offers a traditional longbow silhouette with contemporary construction materials.
Manufactured in the Czech Republic by Lazecký, the ZEUS is available in draw weights ranging from 25 to 60 lb, with a maximum draw length of 32 inches.
The manufacturer specifies a recommended brace height of 18–19.5 cm and an approximate bow weight of 600 grams, depending on the individual configuration.
The ZEUS is intended for traditional, field and 3D archery, offering a combination of longbow styling, laminated materials and individually selected draw weight.
Key features:
handcrafted in the Czech Republic by Lazecký,
traditional-style longbow with modern laminated construction,
68-inch bow length designation,
approximately 170 cm when strung according to the supplier,
176.5 cm overall unstrung length,
draw weights from 25 to 60 lb,
maximum draw length of 32 inches,
recommended brace height of 18–19.5 cm,
approximate weight of 600 g depending on configuration,
laminated fiberglass and ash veneer limbs,
distinctive exotic zebrano hardwood riser,
jatoba hardwood limb tips,
thickness-tapered limb construction,
clear two-component protective lacquer,
right-handed configuration,
suitable for traditional, field and 3D archery,
Dacron bowstring, fur silencers and nocking point included.
Lazecký ZEUS – A Handcrafted Longbow from the Czech Republic
The Lazecký ZEUS is manufactured by a Czech bow maker producing archery equipment in Velká Polom.
The model combines the distinctive appearance of a longbow with a laminated structure using natural hardwoods and fiberglass.
Its construction reflects a modern approach to bow making rather than an attempt to reproduce one particular historical artifact.
The combination of ash, fiberglass, zebrano and jatoba gives the ZEUS its distinctive material appearance.
This longbow is intended for archers who prefer a full-length bow with a wooden riser and carefully constructed laminated limbs.
68-Inch Longbow – Dimensions and Design
The ZEUS carries a manufacturer's length designation of 68 inches.
According to the supplier, its strung length is approximately 170 cm, while its overall unstrung length is 176.5 cm.
These dimensions should be distinguished from one another because nominal bow length, strung dimensions and unstrung physical length are not necessarily measured using the same method.
The long silhouette is a characteristic feature of this bow category.
However, selecting a suitable longbow requires consideration of more than its overall length.
Actual draw length, desired draw weight and the manufacturer's operating limits are equally important.
For the ZEUS, the specified maximum draw length is 32 inches.
Laminated Fiberglass and Ash Veneer Limbs
The limbs of the Lazecký ZEUS combine fiberglass with ash veneer in a laminated construction.
Fiberglass forms part of the mechanically active limb structure, while ash veneer provides a natural wooden layer.
The behavior of the bow depends on the complete laminated construction rather than on any single material.
During the draw, the limbs flex and store energy.
When the bowstring is released, the limbs return toward their original shape and transfer part of that stored energy to the arrow.
Consistent limb construction and the correct condition of the laminated structure are important for proper bow operation.
Thickness-Tapered Limb Construction
One of the notable construction features of the ZEUS is its thickness-tapered limbs.
The thickness of each limb changes along its length to achieve the intended distribution of bending.
This approach allows the bow maker to influence how different sections of the limb work during the draw and release.
The mass of the moving limb tips also contributes to the bow's dynamic behavior.
According to the supplier, the tapered limbs and lightweight tips contribute to arrow speed.
Actual performance depends on several factors, including draw weight, draw length, arrow mass and the complete shooting setup.
Exotic Zebrano Hardwood Riser
The riser of the Lazecký ZEUS is made from exotic zebrano hardwood.
Zebrano is known for its distinctive striped grain pattern, creating a visually recognizable appearance.
The riser is both an important structural component and the part of the bow held by the archer.
Its shape influences how the bow is gripped and controlled throughout the shooting process.
When choosing a longbow, grip comfort should be considered alongside draw weight and overall dimensions.
Because zebrano is a natural wood, individual risers may vary slightly in grain and color.
Jatoba Hardwood Limb Tips
The limb tips of the ZEUS are made from exotic jatoba hardwood.
Jatoba provides a contrasting natural material detail and forms part of the bow's limb-end construction.
The limb tips are particularly important because they are located where the bowstring is attached.
Before shooting, their condition and the correct seating of the string should be checked.
The combination of zebrano, jatoba, ash veneer and fiberglass is a characteristic feature of the ZEUS model.
Clear Two-Component Lacquer Finish
The bow is finished with a clear two-component lacquer.
The transparent finish allows the natural wood grain to remain visible while providing a protective surface layer.
This is particularly noticeable on the zebrano riser, where the contrasting wood pattern forms a significant part of the design.
As with other laminated wooden bows, appropriate care and storage are important.
The bow should be protected from excessive heat, prolonged moisture exposure and mechanical damage.
The condition of the finish and the underlying material should be checked regularly.
Available Draw Weights from 25 to 60 lb
The Lazecký ZEUS is offered with draw weights ranging from 25 to 60 lb.
This range provides options for archers with different levels of physical strength and shooting experience.
Choosing the correct draw weight should take into account:
actual draw length,
physical condition,
previous longbow experience,
ability to repeat a controlled draw,
intended training or competition use.
For archers beginning longbow shooting, a lower draw weight may make it easier to develop proper technique.
Higher draw weights require suitable physical preparation, experience and correctly matched arrows.
The highest available draw weight is not automatically the best choice. Controlled shooting and repeatable technique are more important than selecting the strongest bow.
Maximum Draw Length – 32 Inches
The manufacturer's specified maximum draw length for the ZEUS is 32 inches, approximately 81 cm.
This maximum must not be exceeded.
Before selecting the bow, archers should determine their actual draw length.
Drawing beyond the specified limit can place excessive stress on the bow's construction.
Arrow length is also important.
A properly selected arrow must remain safely supported throughout the draw and must not be so short that its point or shaft can pass behind the safe support area.
A maximum draw length of 32 inches does not mean that every archer should draw the bow to this exact length.
Recommended Brace Height – 18 to 19.5 cm
The manufacturer specifies a recommended brace height of 18–19.5 cm for the Lazecký ZEUS.
Brace height is the distance between the bowstring and the designated reference point on the riser when the bow is strung but not drawn.
It is an important setup parameter that influences the behavior of the bow during the shot.
A suitable bow square or archery measuring tool can be used to check the brace height.
Adjustments should follow the manufacturer's recommendations.
Settings intended for other longbow models should not automatically be transferred to the ZEUS.
Arrow Speed – Supplier's Test Configuration
The supplier reports an arrow speed of 190 km/h with a 35 lb ZEUS and a 30-inch Easton Vector carbon arrow.
This figure refers to the particular bow and arrow combination described by the supplier.
It should not be treated as the guaranteed speed of all ZEUS configurations.
Actual arrow speed depends on draw weight, draw length, arrow mass, bowstring characteristics and shooting conditions.
When comparing bow performance, it is therefore important to consider the conditions under which a speed measurement was obtained.
Lazecký ZEUS for 3D and Field Archery
The ZEUS is presented by the supplier as suitable for field and 3D archery.
These disciplines involve shooting at targets placed at varying distances and in different environments.
Successful shooting requires consistent technique, controlled drawing and repeatable release.
The ZEUS may appeal to archers who prefer a longbow with laminated limbs, distinctive natural hardwood components and a selectable draw weight.
Competition eligibility must always be checked against the rules of the relevant archery organization.
The commercial designation of a bow as a longbow does not automatically establish its eligibility for every competition longbow division.
Recommended Arrows for the ZEUS
The supplier recommends wooden, aluminum or carbon arrows fitted with nocks and natural feather fletching.
The listed arrow length range is 660–810 mm.
However, the correct arrow length must always be selected according to the archer's actual draw length, with an appropriate safety allowance.
Important considerations include:
bow draw weight,
actual draw length,
arrow shaft length,
arrow spine,
point weight,
nock compatibility,
fletching material and arrangement.
Natural feather fletching is particularly relevant to traditional bow configurations in which the arrow passes close to the shooting hand or riser.
Arrow selection should never be based solely on length without considering spine and the complete bow setup.
Dacron Bowstring and Fur String Silencers
The Lazecký ZEUS is supplied with a Dacron bowstring.
The bowstring is an essential functional component and should be inspected regularly for damage or wear.
The supplier also includes fur string silencers and a nocking point.
Fur silencers are used to help reduce bowstring vibration and noise.
The nocking point defines the appropriate location for placing the arrow nock on the string.
These accessories allow the bow to be prepared for use according to the manufacturer's setup requirements.
What Is Included?
The supplier lists the following items with the bow:
Dacron bowstring,
fur string silencers,
nocking point for installation.
The nocking point is supplied for installation by the user.
According to the supplier's ordering instructions, customers who request installation can provide their arrow diameter in the order notes.
Arrows are not listed among the supplied accessories.
Right-Handed Configuration
The verified supplier listing specifies a right-handed ZEUS.
In this configuration, the archer normally holds the bow in the left hand and draws the string with the right hand.
Choosing the correct handedness is important for comfortable and consistent shooting.
Availability of a left-handed model has not been established from the specific supplier listing and should be checked separately if needed.
Safe Use and Maintenance
The bow, string and arrows should be inspected before every shooting session.
Particular attention should be given to the laminated limbs, their joints, the wooden riser and the limb tips.
The bow should not be used if cracks, delamination or other structural damage are suspected.
Never release the string without an arrow.
Do not exceed the maximum draw length of 32 inches.
Maintain the recommended brace height of 18–19.5 cm and use appropriately matched arrows.
During storage, protect the bow from unsuitable temperatures, prolonged humidity and physical damage.
Frequently Asked Questions
Who manufactures the Lazecký ZEUS?
Czech bow maker Lazecký, based in Velká Polom.
What type of bow is the ZEUS?
A longbow with modern laminated limb construction.
Is the ZEUS made in the Czech Republic?
Yes. The supplier identifies it as a handcrafted Czech bow.
How long is the bow?
Its nominal length designation is 68 inches. The supplier specifies approximately 170 cm when strung and 176.5 cm when unstrung.
Which draw weights are available?
The listed draw-weight range is 25–60 lb. Individual available options should be checked in the current product selection.
What is the maximum draw length?
32 inches, approximately 81 cm.
What is the recommended brace height?
18–19.5 cm.
How much does the ZEUS weigh?
Approximately 600 g, depending on draw weight and wood configuration.
What are the limbs made from?
Fiberglass and ash veneer.
What material is used for the riser?
Exotic zebrano hardwood.
What material is used for the limb tips?
Exotic jatoba hardwood.
What is the surface finish?
Clear two-component lacquer.
Is the ZEUS suitable for 3D archery?
Yes. The supplier recommends it for field and 3D archery. Competition classification should be checked according to the relevant rules.
How fast does the bow shoot?
The supplier reports 190 km/h for a 35 lb configuration with a 30-inch Easton Vector carbon arrow. This is not a guaranteed speed for every configuration.
Is this a right-handed bow?
Yes. The verified product listing is for right-handed archers.
Which arrows can be used?
Suitable wooden, aluminum or carbon arrows with correctly matched length, spine, nocks and natural feather fletching, following the supplier's recommendation.
Is a bowstring included?
Yes. A Dacron bowstring is included.
Are fur string silencers included?
Yes.
Is a nocking point included?
Yes. It is supplied for installation.
Is the ZEUS an exact historical reproduction?
No. It is a modern Czech longbow using a combination of laminated natural and synthetic materials.
Summary
The Lazecký ZEUS 68″ is a handcrafted Czech longbow combining laminated fiberglass and ash veneer limbs with a distinctive exotic zebrano hardwood riser.
Its jatoba limb tips and clear lacquer finish complement the natural wood construction.
The bow is offered in draw weights from 25 to 60 lb, with a maximum draw length of 32 inches and a recommended brace height of 18–19.5 cm.
Key features:
manufactured by Lazecký in the Czech Republic,
68-inch longbow,
176.5 cm unstrung length,
25–60 lb draw-weight range,
32-inch maximum draw length,
18–19.5 cm brace height,
approximately 600 g bow weight,
fiberglass and ash veneer limbs,
thickness-tapered limb construction,
zebrano hardwood riser,
jatoba hardwood tips,
clear two-component lacquer,
right-handed configuration,
suitable for traditional, field and 3D archery,
Dacron bowstring, fur silencers and nocking point included.