Lazecký Kresčak 68″ – Czech Traditional Longbow 24–65 lb

Lazecký Kresčak 68″ is a handcrafted Czech longbow inspired by traditional English archery.

Lazecký officially classifies the model as a LONG BOW. Its construction combines ash wood with transparent high-strength fiberglass and a Dacron bowstring.

Kresčak therefore retains the appearance and shooting concept of a traditional longbow while using modern laminated construction.

Made in the Czech Republic by Lazecký

Kresčak is manufactured by Lazecký in the Czech Republic.

The manufacturer describes it as a traditional longbow reminiscent of bows used by medieval English archers.

It is not an exact historical reproduction.

Modern fiberglass and a Dacron bowstring clearly distinguish it from an archaeological English selfbow.

The historical English longbow

The English longbow is one of the best-known European traditional bow designs.

An exceptionally important archaeological collection comes from the Mary Rose, which sank in 1545.

A total of 172 longbows were recovered. They were made from single pieces of yew, ranged from approximately 1.84 to 2.11 metres in length and were predominantly D-shaped in cross-section.

Royal Armouries notes that European longbows were often made from yew, although elm, ash and laburnum were also used.

Kresčak draws inspiration from this tradition but uses contemporary laminated construction.

Ash and transparent fiberglass

According to the current manufacturer specification, Kresčak uses ash wood reinforced with transparent high-strength fiberglass.

Ash provides the natural wooden appearance, while fiberglass forms part of the modern working limb structure.

Natural grain and shade may vary between individual bows.

Technical specifications

Manufacturer: Lazecký
Model: Kresčak
Type: longbow
Made in: Czech Republic
Length: 68″ / manufacturer specification approx. 170 cm
Unstrung length: 176.5 cm
Draw weights: 24 / 26 / 28 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 lb
Weight: approx. 550–650 g
Material: ash + transparent high-strength fiberglass
Brace height: 19–21 cm
Grip: standard / leather wrapped
Bowstring: Dacron
Recommended arrow length: 760–810 mm
Recommended maximum arrow length: 32″ / approx. 810 mm
Included: bow + Dacron bowstring

68-inch longbow

Kresčak carries the manufacturer's 68″ length designation, approximately 170 cm according to the supplied specification.

Its unstrung length is approximately 176.5 cm.

This makes it a ground-shooting longbow rather than a compact horsebow.

Draw weights from 24 to 65 lb

Available draw weights are:

• 24 lb
• 26 lb
• 28 lb
• 30 lb
• 35 lb
• 40 lb
• 45 lb
• 50 lb
• 55 lb
• 60 lb
• 65 lb

The manufacturer's current product page confirms the same range.

Lower draw weights are more appropriate for technical development and newer archers.

Higher draw weights require proper technique and physical conditioning.

Standard or leather-wrapped grip

Customers can choose between:

• standard wooden grip
• leather-wrapped grip

Both options are offered by the manufacturer.

The leather version provides a more traditional visual character.

Brace height – 19 to 21 cm

The recommended brace height is 19–21 cm, matching the current Lazecký specification.

Correct brace height influences string position and overall bow behavior.

Dacron bowstring

Kresčak is supplied with a Dacron bowstring.

Lazecký also recommends regular waxing of the string.

Inspect fibres, loops and serving before every shooting session.

Wooden arrows

Wooden arrows are the primary recommendation for Kresčak.

The current manufacturer page lists 760 and 810 mm wooden arrows with natural turkey-feather fletching.

Depending on the individual setup, arrows may use:

• a traditional self nock
• a plastic nock

The appropriate configuration depends on intended use and desired historical character.

32 inches refers to arrow length

The supplied technical data lists 32″ / approximately 810 mm as the recommended maximum arrow length.

This should not be interpreted as maximum bow draw length.

We therefore do not infer maximum safe draw from the arrow specification.

Tested arrow speed – approximately 188 km/h

With a specific test setup:

35 lb Kresčak + 30″ Easton Vector arrow

an indicated arrow speed of approximately 188 km/h / 52.2 m/s was recorded.

This is not a universal speed figure for every Kresčak.

Actual velocity depends on draw length, arrow mass, spine, point weight, bowstring condition and shooting technique.

Traditional and instinctive archery

Kresčak is suitable for:

• traditional archery
• instinctive shooting
• target practice
• 3D archery
• field archery
• historically themed events
• recreational archery

Its longbow design is intended primarily for ground shooting.

3D and field archery

The wide draw-weight range makes Kresčak suitable for different styles of 3D and field archery.

For longer courses, select a draw weight that can still be controlled after many shots.

Historical events and reenactment

Kresčak can provide a traditional visual appearance, especially with a leather-wrapped grip and wooden arrows.

However, it is not an exact medieval replica.

Fiberglass and Dacron are modern materials, and historical-event eligibility therefore depends on the rules of the organizer.

What is included?

The package contains:

• Lazecký Kresčak 68″
• Dacron bowstring

Safety

Never dry-fire the bow.

Before shooting, inspect:

• ash components
• fiberglass
• grip
• bowstring
• arrows

Always use arrows matched to the actual bow draw weight, archer's draw and required spine.

Frequently asked questions

Who manufactures Kresčak?

Czech manufacturer Lazecký.

Is Kresčak a longbow?

Yes. Lazecký officially classifies it in the LONG BOW category.

Is it an exact historical replica?

No. It is a modern laminated Czech longbow inspired by historical English archery.

What draw weights are available?

24–65 lb.

What is it made from?

Ash wood reinforced with transparent high-strength fiberglass.

What bowstring is included?

Dacron.

What is the recommended brace height?

19–21 cm.

Which grip options are available?

Standard wooden or leather wrapped.

Which arrows are recommended?

Primarily wooden arrows of appropriate length, spine and mass.

Can traditional self nocks be used?

Yes. Depending on configuration, arrows can use a traditional self nock or a plastic nock.

Is 32 inches the maximum draw?

No.

It refers to the recommended maximum arrow length.

Is Kresčak suitable for 3D archery?

Yes.

Is it suitable for beginners?

Yes, when an appropriate lower draw weight is selected.

Lazecký Kresčak 68″ – summary

Lazecký Kresčak 68″ is a handcrafted Czech longbow inspired by the traditional English longbow.

Its modern laminated construction combines ash wood with transparent high-strength fiberglass and a Dacron bowstring. Lazecký officially places it in the LONG BOW category.

Available in draw weights from 24 to 65 lb, Kresčak is designed for traditional, instinctive, 3D and field archery.