Cart
0
0.00 zł
Lazecký Fénix 64″ – Handcrafted Czech Hybrid Longbow in Fénix and Fénix Lady Versions
The Lazecký Fénix 64″ is a handcrafted Czech hybrid longbow combining traditional bow styling with modern laminated materials, including black fiberglass, bamboo and solid exotic padauk hardwood. Available in two ergonomic configurations, Fénix and Fénix Lady, it allows archers to choose the grip size most suitable for their hand.
Manufactured by Czech bow maker Lazecký in Velká Polom, the Fénix combines design elements associated with traditional longbows and reflex bows.
Both versions share the same basic construction, overall length and technical specifications.
The standard Fénix is offered in available draw weights from 26 to 60 lb, while Fénix Lady is available in 26 lb with a narrower grip.
Key features:
Czech manufacturer Lazecký,
handcrafted production,
64-inch hybrid longbow,
two configurations: Fénix and Fénix Lady,
standard Fénix grip,
narrower Fénix Lady grip for smaller hands,
standard Fénix draw-weight range of 26–60 lb,
Fénix Lady draw weight of 26 lb,
approximately 163 cm overall nominal bow length,
157 cm strung length according to the supplier,
maximum draw length of 32 inches,
recommended brace height of 19.5–21.5 cm,
approximately 840 g bow weight,
black fiberglass and laminated bamboo limbs,
solid padauk hardwood riser,
Micarta limb tips,
clear protective finish,
right-handed configuration,
Dacron bowstring included,
suitable for traditional, field and 3D archery.
Handcrafted Hybrid Longbow from the Czech Republic
The Lazecký Fénix is manufactured in the Czech Republic using a combination of natural and synthetic materials.
Its design blends the appearance of a traditional longbow with elements of modern hybrid construction.
The limbs combine fiberglass and laminated bamboo, while the central riser is made from solid padauk hardwood.
This material combination creates a distinctive bow intended for contemporary traditional archery.
The Fénix is not presented as an exact historical reproduction of a specific archaeological artifact.
Instead, it is a modern handcrafted bow designed for regular shooting and traditional archery disciplines.
Two Grip Configurations – Fénix and Fénix Lady
Customers can choose between two ergonomic versions of the same bow model.
The standard Fénix features a conventional-width grip, while Fénix Lady has a narrower riser grip intended for archers with smaller hands.
According to the manufacturer, the remaining basic technical specifications are unchanged.
The choice therefore concerns grip ergonomics and the available draw-weight configuration.
Standard Fénix – Conventional Grip
The standard Lazecký Fénix 64″ features an ergonomically shaped riser with a conventional grip width.
The grip is made from solid padauk hardwood.
It provides the central hand-contact area used to control the bow during drawing, aiming and releasing.
The standard model is offered in available draw weights ranging from 26 to 60 lb.
Choosing the appropriate draw weight depends on the archer's strength, experience and actual draw length.
Fénix Lady – Narrower Grip for Smaller Hands
Fénix Lady shares the same basic construction as the standard Fénix but features a narrower grip.
This version is designed for archers who prefer a smaller handhold.
Although the model carries the name Lady, it is not exclusively intended for women.
It can also be suitable for men or other archers with smaller hands who find a conventional-width grip less comfortable.
Fénix Lady is available in 26 lb in our current combined product offering.
A narrower grip does not automatically make the bow less capable or lower in quality.
What Is the Difference Between Fénix and Fénix Lady?
The main difference is grip width.
The standard Fénix has a conventional-width padauk riser and a broader selection of draw weights.
Fénix Lady has a narrower riser grip and is offered in 26 lb.
Both versions share the following basic specifications:
64-inch bow length,
black fiberglass and laminated bamboo limbs,
solid padauk riser construction,
Micarta limb tips,
maximum draw length of 32 inches,
recommended brace height of 19.5–21.5 cm,
right-handed configuration.
The best choice depends on hand size, preferred grip feel and required draw weight.
Hybrid Longbow Construction
The Fénix combines features of traditional longbow and reflex bow design.
Its long silhouette preserves the character of traditional archery equipment, while its limb structure uses laminated materials.
During the draw, the limbs flex and store energy.
When the string is released, part of that stored energy is transferred to the arrow.
Draw characteristics and actual performance depend on the overall bow geometry, the selected draw weight, draw length and arrow configuration.
This makes the Fénix an option for archers seeking traditional styling with modern construction.
64-Inch Bow Length
Both the Fénix and Fénix Lady have a nominal length of 64 inches, approximately 163 cm.
According to the supplier, the strung bow measures approximately 157 cm.
These dimensions describe different measurement conventions and should not be confused.
When selecting a bow, length should be considered together with draw weight, maximum draw length and grip ergonomics.
The Fénix has a manufacturer-specified maximum draw length of 32 inches.
Fiberglass and Laminated Bamboo Limbs
The limbs combine black fiberglass with laminated bamboo.
Fiberglass forms part of the mechanically active laminated structure.
Bamboo provides another structural material used in the limb construction.
The properties of the finished bow depend on how these layers are combined and shaped.
During the draw, the limbs flex and store energy, which is subsequently transferred to the arrow when the string is released.
The black limb finish contrasts with the natural appearance of the wooden riser.
Solid Padauk Hardwood Riser
The central riser of the Fénix is made from solid exotic padauk hardwood.
Padauk is recognized for its distinctive natural color and grain.
The riser is an important structural and ergonomic part of the bow.
Its shape affects how the archer holds and controls the bow during shooting.
Fénix Lady uses a narrower version of this grip to accommodate smaller hands.
Because padauk is a natural material, individual bows may show slight differences in wood grain and color.
Micarta Limb Tips
The limb tips are made from Micarta, a laminated composite material.
The tips form an important part of the limb-end structure where the bowstring is attached.
Their condition should be checked regularly.
Any damage to the string grooves or surrounding construction should be investigated before further shooting.
Available Draw Weights
The standard Fénix is offered in the available draw-weight options within the 26–60 lb range.
The selected draw weight should match the archer's actual strength, draw length and experience.
For beginners, a lower draw weight generally makes it easier to develop correct technique.
Higher draw weights require appropriate physical conditioning and shooting experience.
Fénix Lady is available in 26 lb in our current product configuration.
Neither a lower draw weight nor a narrower grip automatically guarantees suitability for a particular archer.
Safe and controlled shooting technique remains essential.
Maximum Draw Length – 32 Inches
Both Fénix configurations have a specified maximum draw length of 32 inches, approximately 81 cm.
This limit must not be exceeded.
Archers should establish their actual draw length before selecting the bow.
Drawing beyond the specified maximum may place excessive stress on the bow's construction.
The arrow must also be long enough to remain safely supported throughout the draw.
Recommended Brace Height – 19.5 to 21.5 cm
The manufacturer recommends a brace height of 19.5–21.5 cm.
Brace height is an important setup parameter describing the distance between the bowstring and the designated riser reference point when the bow is strung but not drawn.
Correct settings contribute to proper bow operation.
A bow square or appropriate archery measuring tool can be used to check the measurement.
Adjustments should follow the manufacturer's guidance.
Dacron Bowstring Included
A Dacron bowstring is included with the basic Fénix package.
The bowstring must match the model's length and construction requirements.
Before shooting, inspect the fibers, string loops and center serving.
A damaged bowstring must not be used.
When replacing the string, select the correct length and a material approved by the bow manufacturer.
Traditional Archery with Fénix
Both Fénix versions are intended for archers interested in traditional-style shooting.
The hybrid construction combines a longbow-inspired silhouette with modern laminated materials.
Correct draw-weight selection, controlled shooting technique and suitable arrows remain important for regular training.
Choosing a comfortable grip is especially relevant during longer sessions.
For archers with smaller hands, the narrower Fénix Lady grip may offer a more comfortable alternative to the standard version.
Field and 3D Archery
The manufacturer recommends the Fénix for field archery and 3D archery.
These disciplines involve shooting at targets placed at different distances and in varying environments.
Successful shooting requires consistent form, distance judgment and controlled release.
Before using the bow in competitions, the archer should verify the equipment rules of the relevant organization.
A hybrid longbow may be classified differently from a conventional longbow under particular competition regulations.
Choosing Suitable Arrows
The supplier recommends properly matched wooden, aluminum or carbon arrows with nocks and genuine feather fletching.
The supplier lists arrow lengths from 660 to 810 mm.
However, actual arrow length must be selected according to the archer's draw length and appropriate safety requirements.
Important considerations include shaft length, spine, point weight, fletching and nock compatibility.
An arrow must never be too short for the archer's full draw.
Natural feather fletching is commonly preferred for traditional shooting configurations where the arrow passes close to the riser or shooting shelf.
What Is Included?
The confirmed basic package includes:
one Lazecký Fénix or Fénix Lady bow, depending on the selected version,
one Dacron bowstring.
Arrows are not included in the supplier's confirmed basic contents.
Additional accessories should be verified separately if required.
Choosing the Right Version
When ordering, select the preferred grip configuration first and then choose the appropriate draw weight.
The standard Fénix is intended for archers who prefer a conventional-width grip and need a broader choice of draw weights.
Fénix Lady is designed for smaller hands and is offered in 26 lb.
Selection should be based on grip comfort, physical ability and shooting requirements rather than gender alone.
Safe Use and Maintenance
Before every shooting session, inspect the bow, bowstring and arrows.
Pay particular attention to the laminated limbs, wooden riser, string grooves and limb tips.
The bow must not be used if cracks, delamination or other structural damage are suspected.
Never release the bowstring without an arrow.
Respect the maximum draw length of 32 inches and maintain the recommended brace height.
Protect the bow from excessive heat, prolonged humidity and physical damage during storage.
Frequently Asked Questions
Who manufactures the Lazecký Fénix?
Czech bow maker Lazecký, based in Velká Polom.
What type of bow is the Fénix?
A hybrid longbow combining design features associated with longbows and reflex bows.
What is the difference between Fénix and Fénix Lady?
Fénix Lady has a narrower grip designed for smaller hands. The basic technical construction remains the same.
Is Fénix Lady only for women?
No. It may also suit men or other archers with smaller hands.
How long is the bow?
64 inches, approximately 163 cm.
What is the strung length?
Approximately 157 cm according to the supplier.
Which draw weights are available for the standard Fénix?
Available options within the 26–60 lb range.
Which draw weight is available for Fénix Lady?
26 lb.
What is the maximum draw length?
32 inches.
What is the recommended brace height?
19.5–21.5 cm.
How much does the bow weigh?
Approximately 840 g according to the supplier.
What materials are used for the limbs?
Black fiberglass and laminated bamboo.
What is the riser made from?
Solid exotic padauk hardwood.
What are the limb tips made from?
Micarta.
Is the bow right-handed?
Yes. Both currently offered versions are right-handed.
Is a bowstring included?
Yes. A Dacron bowstring is included.
Is the Fénix suitable for 3D archery?
The manufacturer recommends it for field and 3D archery. Competition eligibility depends on the relevant organization's rules.
What arrows can be used?
Appropriately matched wooden, aluminum or carbon arrows with suitable spine, length and natural feather fletching.
Is the Fénix an exact historical reproduction?
No. It is a modern handcrafted Czech hybrid bow using laminated materials.
Summary
The Lazecký Fénix 64″ is a handcrafted Czech hybrid longbow available in two ergonomic configurations – the standard Fénix and the narrower-grip Fénix Lady.
Both versions feature laminated bamboo and black fiberglass limbs, a solid padauk hardwood riser and Micarta limb tips.
The standard Fénix offers a wider selection of draw weights, while Fénix Lady is available in 26 lb for archers who prefer a smaller grip.
Key features:
Czech manufacturer Lazecký,
handcrafted hybrid longbow,
64-inch length,
Fénix standard-grip configuration,
Fénix Lady narrow-grip configuration,
26–60 lb range for the standard Fénix,
26 lb Fénix Lady,
32-inch maximum draw length,
19.5–21.5 cm recommended brace height,
approximately 840 g bow weight,
black fiberglass and laminated bamboo limbs,
solid padauk hardwood riser,
Micarta limb tips,
right-handed configuration,
Dacron bowstring included,
suitable for traditional, field and 3D archery.