Cart
0
0.00 Kč
LARP Foam Arrow Heads for Building and Repairing Arrows
LARP Foam Arrow Heads – 6 pcs are components designed for building or repairing compatible arrows used in LARP, fantasy games and other organised archery activities.
Each head measures approximately 53 mm in diameter, 90 mm in overall length and weighs around 13 g.
Not a conventional arrow point
Although these products are sometimes called LARP arrow tips, their construction and purpose differ significantly from a conventional target point.
The large soft impact area is designed to spread contact over a much wider surface.
53 mm impact diameter
The approximate outer diameter is:
53 mm / 5.3 cm
This dimension refers to the large impact head itself.
It does not specify the shaft diameter or mounting hole.
90 mm overall length
The stated overall length is approximately:
90 mm / 9 cm
The mounting section dimensions are not separately specified.
Approx. 13 g weight
Each head weighs approximately:
13 g
Front-end weight affects the completed arrow's balance and dynamic behaviour, so the entire arrow setup needs to be considered.
Foam, PU leather and ABS
The construction combines three materials:
Foam for the soft impact section.
PU leather as a synthetic polyurethane-based surface material.
ABS as a firmer structural material.
The precise internal layout is not specified.
Shaft compatibility
The mounting diameter and attachment system are not provided.
For that reason, these heads should not be described as universally compatible with every carbon, fiberglass or wooden shaft.
The 53 mm dimension is the impact-head diameter, not the mounting diameter.
Building a complete LARP arrow
A complete arrow should be considered as one technical system.
Important factors include shaft compatibility, spine, arrow length, total weight, nock, fletching, head attachment and the bow being used.
Inspect before use
Check every foam head before an organised activity.
Do not use a head with major tears, permanent deformation, loose construction or exposed hard internal components.
A safety-related component should not simply be patched over when its structural condition is uncertain.
LARP rules
A foam impact head does not by itself determine whether an arrow is approved for use towards participants.
Event rules may specify bow power, minimum distance, hit zones, head dimensions and equipment inspection requirements.
Storage
Store the heads dry and without prolonged compression.
Avoid heavy objects on top of the foam and excessive heat that could permanently deform synthetic materials.
Erenhill Archery School
Erenhill Archery School can help with technical component selection when building a compatible LARP arrow. Rules for a specific event must always be verified with its organiser.
Frequently Asked Questions
How many heads are included?
What is the approximate diameter?
53 mm.
What is the overall length?
Approximately 90 mm.
How much does one head weigh?
Approximately 13 g.
What materials are used?
Foam, PU leather and ABS.
Is the whole head soft?
No. The construction also contains ABS.
Is this a complete arrow?
No. These are arrow heads only.
Are they universally compatible?
No universal shaft compatibility is confirmed.
Do they fit an 8 mm wooden shaft?
The mounting diameter is not specified, so this cannot be confirmed.
How are they attached?
The exact mounting system is not specified.
What is the maximum bow draw weight?
Not specified.
What is the minimum safe distance?
Not specified.
Are they certified?
No specific certification is stated in the current information.
Final Summary
LARP Foam Arrow Heads – 6 pcs are components for building and repairing compatible game arrows.
Confirmed specifications include:
- 6 pieces
- approx. 13 g each
- approx. 53 mm diameter
- approx. 90 mm overall length
- foam + PU leather + ABS
Their large soft impact area is intended for LARP-style use, while the safety of the completed arrow always depends on the full equipment setup and the rules of the organised activity.