Easton Diamond Vanes 2.8″ – Plastic Fletching Vanes for Archery Arrows

Easton Diamond Vanes 2.8″ is a plastic fletching vane designed to help stabilize arrows during flight. Featuring a parabolic profile, a height of 12.7 mm and a weight of approximately 6 grains, it is a practical component for building new arrows and replacing damaged fletching.

Part of the Easton Diamond Vanes product range, size 280 is particularly suitable for selected aluminum arrow configurations, including Easton Jazz Black 1716, 1816, 1916 and 2016.

This vane is available in two colors: white and neon orange. Customers can order individual pieces according to the number required for their arrow-building or repair work.

Key features:

• Easton Diamond Vanes product range,

• plastic fletching vane for archery arrows,

• size 280, commercially designated 2.8 inches,

• manufacturer-specified length of approximately 73 mm,

• vane height of 12.7 mm,

• weight of approximately 6 grains (0.39 g),

• parabolic profile,

• designed to stabilize arrow flight,

• suitable for building and repairing arrows,

• recommended by the supplier for selected Easton Jazz Black aluminum arrows,

• available in white and neon orange,

• sold individually – price per piece.

Easton Diamond Vanes – Plastic Arrow Fletching

Plastic vanes are an important part of arrow construction because they help stabilize the arrow after release from the bow.

They are attached near the rear of the shaft, close to the nock.

As the arrow travels through the air, the vanes create aerodynamic forces that help maintain its intended orientation.

Correctly selected and attached fletching is therefore an important component of a properly assembled arrow.

Easton Diamond Vanes can be used when assembling new arrows or replacing damaged vanes on existing equipment.

Vane size, position, attachment and compatibility with the arrow all contribute to the final configuration.

Size 280 – Easton Diamond Vanes 2.8 Inches

This product belongs to the Easton Diamond Vanes size 280 range.

It is commonly marketed under the commercial size designation of 2.8 inches.

Easton's technical specifications list size 280 with a length of 2.875 inches, equivalent to approximately 73 mm.

This dimension should be considered when selecting replacement fletching for an existing arrow.

When repairing damaged fletching, using a matching vane model and size helps maintain the original configuration.

Vane Height – 12.7 mm

Easton Diamond Vanes size 280 has a specified height of 0.5 inches, equivalent to 12.7 mm.

Vane height is an important specification because it contributes to the aerodynamic surface interacting with airflow during flight.

It should be considered together with vane length and weight.

When selecting plastic vanes for a particular bow, it is also important to verify compatibility with the arrow rest and ensure appropriate clearance during the shot.

Vane Weight – Approximately 6 Grains

According to Easton's technical specifications, one size 280 Diamond Vane weighs approximately 6 grains, equivalent to about 0.39 grams.

Vane weight contributes to the total weight and balance of the arrow.

When building a matching set of arrows, using consistent vane types, dimensions and quantities helps maintain similar specifications throughout the set.

For repairs, matching the original fletching is generally preferable to mixing substantially different vane types.

Parabolic Vane Profile

Easton Diamond Vanes feature a parabolic profile intended to contribute to arrow stability.

The shape of the vane influences airflow around the rear section of the arrow.

However, arrow flight depends on the entire shooting setup, including the shaft, point, nock, fletching arrangement and bow tuning.

For this reason, vane selection should form part of the overall arrow configuration rather than being considered independently.

Suitable for Easton Jazz Black Aluminum Arrows

The supplier specifically recommends Easton Diamond Vanes 2.8″ for selected Easton Jazz Black aluminum arrows.

Listed compatible models include:

• Easton Jazz Black 1716

• Easton Jazz Black 1816

• Easton Jazz Black 1916

• Easton Jazz Black 2016

These aluminum shaft models can be fitted with suitable plastic fletching.

When installing the vanes, it is important to prepare the shaft surface correctly and use an appropriate adhesive.

Compatibility with other shafts should be verified according to shaft material, dimensions and the intended fletching arrangement.

Building New Arrows with Easton Diamond Vanes

Easton Diamond Vanes 2.8″ can be used when assembling new archery arrows.

For consistent results, the vanes should be positioned carefully around the shaft.

A fletching jig is useful for maintaining the intended spacing and orientation.

Before applying adhesive, the shaft surface should be inspected and prepared according to the requirements of the particular material.

The instructions supplied with the selected adhesive should always be followed.

Replacing Damaged Arrow Fletching

Individual plastic vanes can also be used to replace damaged or detached fletching.

Damaged vanes may negatively affect arrow flight and should be inspected before further shooting.

During repairs, any remaining adhesive and damaged material should be removed carefully without damaging the shaft.

A replacement vane can then be attached in the appropriate position.

If only one vane is being replaced, matching the remaining vanes in size and design helps maintain the existing arrow configuration.

White Easton Diamond Vanes

White is one of the two available colors of this product.

White vanes can be combined with different shaft, nock and fletching colors.

The light-colored finish can also help distinguish a particular arrow set from other equipment.

Customers can select the white variant directly when ordering.

Neon Orange Easton Diamond Vanes

Neon orange is the second available color option.

Its bright appearance can help visually distinguish arrow fletching and create contrasting combinations.

Neon orange vanes may be used as part of a personalized arrow color scheme.

Both available colors share the same size 280 technical specifications.

How to Attach Plastic Arrow Vanes

Correct attachment is important for consistent and safe arrow construction.

Before installing a vane, the shaft should be inspected and prepared.

A suitable fletching adhesive should then be applied according to its manufacturer's instructions.

A fletching jig can help maintain the correct position and spacing.

The adhesive must be allowed to cure for the recommended period before the arrow is used.

After installation, the attachment of each vane should be checked.

Difference Between Easton Diamond Vanes 2.35″ and 2.8″

Easton Diamond Vanes are available in multiple sizes, each with different dimensions and weights.

The smaller 2.35″ version corresponds to size 235, while this larger 2.8″ version corresponds to size 280.

According to Easton's technical specifications:

• Size 235: approximately 60 mm long, 9.5 mm high and 4 grains.

• Size 280: approximately 73 mm long, 12.7 mm high and 6 grains.

Size 280 therefore has a larger fletching surface and a higher individual vane weight.

The appropriate size depends on the desired arrow configuration and compatibility with the shooting equipment.

Plastic Vanes and Traditional Archery

Compatibility with the bow's arrow support system should be considered when selecting plastic vanes.

Plastic fletching can be suitable for bows equipped with an appropriate arrow rest.

However, traditional bows that shoot directly from the hand or a shelf may require different fletching.

Natural feathers can be more appropriate for certain traditional setups.

Before choosing plastic vanes, archers should verify the suitability of the selected vane size and material for their particular bow.

Sold Individually – Price Per Vane

Easton Diamond Vanes 2.8″ is sold as a single plastic vane.

The listed price is for one piece, not for a complete fletching set.

Customers can therefore order the exact quantity required for new arrows or replacement work.

For a conventional three-vane configuration, three individual vanes are required per arrow.

Frequently Asked Questions

What is Easton Diamond Vanes 2.8″?

A plastic arrow vane designed to help stabilize an arrow during flight.

What brand is the product?

Easton, Diamond Vanes product range.

What is the size designation?

Size 280, commercially marketed as 2.8 inches.

How long is the vane?

Easton's catalog specifies 2.875 inches, approximately 73 mm, for size 280.

What is the vane height?

12.7 mm.

How much does one vane weigh?

Approximately 6 grains, or 0.39 grams.

What shape is the vane?

Parabolic.

What material is used?

Plastic.

Which arrows are specifically listed as suitable?

Easton Jazz Black 1716, 1816, 1916 and 2016 aluminum arrows.

Can it be used with other shafts?

Potentially, provided the vane is compatible with the shaft and intended shooting setup.

Which colors are available?

White and neon orange.

Is the price for one vane?

Yes. Each vane is sold individually.

How many vanes are needed for one arrow?

Three for a conventional three-vane fletching configuration.

Can I use this vane to repair an arrow?

Yes, provided the replacement matches the required size and fletching type.

How is the vane attached?

It is bonded to a prepared arrow shaft using suitable fletching adhesive.

What is the difference between size 235 and size 280?

Size 280 is longer, taller and heavier than size 235.

Is this vane suitable for every traditional bow?

Not necessarily. Compatibility depends on how the arrow is supported and the clearance available during shooting.

Summary

Easton Diamond Vanes 2.8″ is a plastic arrow vane with a parabolic profile, designed for arrow stabilization, new arrow assembly and fletching repairs.

Size 280 has a manufacturer-specified length of approximately 73 mm, a height of 12.7 mm and a weight of approximately 6 grains.

The supplier lists it as suitable for selected Easton Jazz Black aluminum arrows.

Key features:

• Easton Diamond Vanes product range,

• size 280 / commercial designation 2.8″,

• manufacturer-specified length of approximately 73 mm,

• height of 12.7 mm,

• weight of approximately 6 grains,

• plastic construction,

• parabolic profile,

• compatible examples: Easton Jazz Black 1716, 1816, 1916 and 2016,

• available in white and neon orange,

• suitable for arrow building and repairs,

• sold individually – price per piece.