Bohning 2″ Plastic Vane – Replacement Fletching for Cobra R9 and RX Crossbow Bolts

Bohning 2″ Plastic Vane is a fletching component designed to help stabilize carbon crossbow bolts during flight. With a length of 2 inches, approximately 5.1 cm, it is suitable for selected carbon bolts used with Cobra R9 and RX crossbows, according to the supplier.

Plastic vanes are important components of crossbow bolt fletching. They help control the orientation of a bolt after it leaves the crossbow.

This product is available in two color options: neon orange and neon yellow. Customers can select their preferred color when ordering.

The vanes are sold individually, allowing customers to purchase the exact quantity required for repairs or new fletching.

Key features:

• Bohning-branded plastic vane,

• 2-inch length (approximately 50.8 mm),

• designed to help stabilize bolt flight,

• supplier-listed compatibility with Cobra R9 and RX carbon bolts,

• suitable for replacing damaged fletching,

• usable when building new fletching for compatible bolts,

• available in neon orange and neon yellow,

• sold individually – price per piece.

Plastic Vanes for Carbon Crossbow Bolts

Plastic vanes are an essential part of the fletching installed near the rear of a crossbow bolt.

Their purpose is to help stabilize the bolt's orientation during flight.

As the bolt moves through the air, the vanes generate aerodynamic forces that contribute to its flight behavior.

Correct vane selection, positioning and attachment are therefore important aspects of bolt construction.

Bohning 2″ plastic vanes can be considered for repairing or assembling compatible carbon crossbow bolts.

When selecting replacement fletching, the dimensions and profile should be compared with the original components.

Vane Length – 2 Inches / 50.8 mm

The specified vane length is 2 inches, equivalent to 50.8 mm or approximately 5.1 cm.

Length is one of the key measurements used when selecting replacement fletching.

It influences the stabilizing surface and the amount of space occupied on the bolt shaft.

For repairs, choosing a replacement that matches the original vane is important.

Two different vane models may share the same length while differing in height, profile or other characteristics.

Therefore, length alone should not be treated as proof of full interchangeability.

Suitable for Cobra R9 Carbon Crossbow Bolts

The supplier identifies carbon bolts for Cobra R9 crossbows as a suitable application for this vane.

During regular shooting, fletching may become worn, damaged or detached.

Damaged vanes can affect bolt flight and should be inspected before further shooting.

A matching replacement vane can be used to restore the fletching of a compatible bolt.

When replacing a single vane, it is important to check that the new component matches the remaining fletching in size and design.

Suitable for Cobra RX Crossbow Bolts

The supplier also lists carbon bolts used with Cobra RX crossbows as a suitable application.

Proper bolt condition is essential for safe and consistent shooting.

In addition to the vanes, the shaft, point and nock should be checked regularly.

The performance of a bolt depends on its complete configuration rather than the vanes alone.

When fitting replacement vanes to Cobra RX bolts, the original fletching arrangement should be maintained.

Compatibility with other crossbow models or bolt types should be verified separately.

Neon Orange Bohning Plastic Vanes

Neon orange is the first available color option.

The bright orange finish makes the vane visually distinctive and can be used to create identifiable fletching combinations.

Neon orange vanes may be selected for new fletching or for replacing damaged components on compatible carbon bolts.

For individual repairs, matching the existing fletching type is recommended.

Neon Yellow Bohning Plastic Vanes

Neon yellow is the second available color option.

Its bright appearance provides another way to visually distinguish the fletching on a carbon bolt.

Neon yellow can be selected according to personal preference or to match an existing bolt configuration.

Both neon yellow and neon orange are offered as color variants of the same product.

How to Select the Color

Customers can choose between two color variants:

• Neon Orange

• Neon Yellow

Both options share the specified length of 2 inches.

Customers select their preferred color and the required quantity before adding the product to their cart.

Each color is a variant of one product rather than a separate product listing.

Replacing Damaged Crossbow Bolt Fletching

Damaged or detached vanes should be inspected and replaced before the bolt is used again.

When repairing fletching, care must be taken not to damage the carbon shaft.

The old vane and adhesive residue should be removed using a procedure appropriate for the specific shaft material.

A suitable replacement vane can then be positioned and attached using compatible fletching adhesive.

A fletching jig can help maintain the required orientation and spacing.

Before the repaired bolt is used, all vanes and the entire bolt should be checked for damage or insecure attachments.

Building New Fletching for Compatible Bolts

Plastic vanes can also be used when constructing new fletching on compatible carbon crossbow bolts.

Correct positioning and secure attachment are important for the complete bolt configuration.

Suitable adhesive and equipment should be selected according to the shaft material and the requirements of the particular bolt.

For crossbow bolts, it is especially important to follow the specifications of the crossbow system and preserve the correct fletching orientation.

How to Choose a Compatible Replacement Vane

When choosing replacement fletching, the new vane should be compared with the original component.

Important considerations include length, height, profile and mounting requirements.

A 2-inch length alone does not guarantee that every plastic vane will be suitable for the same bolt.

For this product, the supplier specifically lists Cobra R9 and RX carbon bolts.

Compatibility with additional models should be confirmed before use.

Sold Individually – Price Per Vane

Bohning 2″ Plastic Vane is sold as a single piece.

The displayed price is for one vane rather than a complete fletching set.

Customers can order the number of replacement vanes needed for their specific repair or assembly project.

Frequently Asked Questions

What is Bohning 2″ Plastic Vane?

A plastic fletching component designed to help stabilize a crossbow bolt during flight.

How long is the vane?

2 inches, equivalent to 50.8 mm or approximately 5.1 cm.

Which crossbow bolts is it suitable for?

The supplier lists carbon bolts used with Cobra R9 and RX crossbows.

Can it be used on Cobra R9 bolts?

Yes, according to the supplier's compatibility information.

Can it be used on Cobra RX bolts?

Yes, the supplier also lists Cobra RX carbon bolts.

Which colors are available?

Neon orange and neon yellow.

Are both colors offered under one product?

Yes. Customers can choose their preferred color as a product variant.

Is the price for one vane?

Yes. The product is sold individually.

Can it be used to repair damaged fletching?

Yes, provided the replacement matches the original fletching and the bolt shaft is not damaged.

Can the vane be glued to a carbon shaft?

Yes, using a suitable procedure and adhesive compatible with the particular shaft material.

Will any 2-inch vane fit the same bolt?

Not necessarily. Other characteristics, including profile and height, must also be considered.

Is it suitable for every crossbow bolt?

Compatibility is specifically listed for Cobra R9 and RX carbon bolts. Other applications require separate verification.

Can a bolt with damaged fletching still be used?

Damaged or insecure fletching should be repaired before further shooting. The condition of the entire bolt should also be inspected.

Summary

Bohning 2″ Plastic Vane is a replacement fletching component intended for compatible carbon crossbow bolts, particularly those used with Cobra R9 and RX crossbows.

It measures approximately 5.1 cm and is available in two bright neon colors.

Key features:

• Bohning-branded plastic vane,

• 2-inch length / approximately 5.1 cm,

• supplier-listed compatibility with Cobra R9 and RX carbon bolts,

• neon orange and neon yellow color options,

• suitable for building and repairing compatible fletching,

• sold individually – price per piece.